Key facts
- 2 production clusters mapped, in Gujarat (~45-47% of module capacity); Rajasthan; Tamil Nadu; Telangana; Karnataka, Punjab; Rajasthan; Gujarat; Maharashtra.
- Market guides for 26 countries, each with destination requirements and transit times.
- Certifications available from the supply base: ISO 9001, CE marking, UL listing, BIS certification, SASO / SABER conformity.
- Typical minimum order: Mixed 20' container across models (typical).
Product overview
Coimbatore in Tamil Nadu is India's best-known pump cluster, alongside Ahmedabad and Rajkot in Gujarat and several large manufacturers in Maharashtra and Kolkata. A segment export figure was not available in our research.
Indian makers export agricultural and domestic pumps (monoblock, jet, self-priming, borewell submersibles in 3, 4, 6 and 8 inch), building-services pumps (end-suction, inline, pressure boosting) and solar pumping systems, with motors from 0.5 to 100 HP.
Africa, the Middle East, South and South-East Asia and Latin America are the core markets. Efficiency regulations (EU ecodesign for water pumps and motors) and conformity schemes (CE, SASO, PVoC, SONCAP) decide market access.
HS note: Pumps with integral motor are still 8413.70 when centrifugal; spare parts 8413.91; standalone motors 8501.
Specifications
| Power range | 0.5-100 HP; single and three phase (typical) |
|---|---|
| Borewell sizes | 3, 4, 6, 8 inch (typical) |
| Materials | CI, SS 304/316 impellers and bowls, noryl stages (typical) |
| Motor efficiency | IE2/IE3 surface motors; rewindable submersible motors (typical) |
| Standards | ISO 2858 / EN 733 end-suction; IS 8034 submersibles; ISO 9906 test (typical) |
| Voltage | 220-240 V / 380-415 V, 50/60 Hz (typical) |
Typical commercial values. Final specifications are fixed per contract and verified by lab report or pre-shipment inspection.
Grades & variants
Agricultural
Borewell and openwell submersibles, monoblocks.
Domestic
Self-priming, jet and pressure pumps.
Building services and industrial
End-suction, inline, multistage.
Solar pumping systems
DC/AC pumps with controllers.
Packaging, MOQ & container loading
| Packing | Sizes | Notes |
|---|---|---|
| Cartons/crates | Cartons for small pumps; wooden crates (ISPM-15) for large sets | — |
Container load (estimate): 20' GP ~8-14 MT depending on mix · 40' HC ~12-20 MT (often volume/crate-limited). Mixed models per container common
Customisation: Buyer branding, voltage/frequency variants, material upgrades
Where we source in India
Producing regions and manufacturing clusters our supplier network draws from.
Tamil Nadu
Coimbatore, Tiruppur
Gujarat
Ahmedabad, Rajkot
Maharashtra
Pune, Kolhapur
ASSUMPTION
Market requirements by region
European Union
CE marking (Machinery, LVD, EMC); clean-water pumps must meet ecodesign minimum efficiency (Reg. (EU) 547/2012) and motors IE3 (Reg. (EU) 2019/1781) (ASSUMPTION - not re-checked). India lost EU GSP preferences for 2026-2028 (Implementing Reg. (EU) 2025/1909), so MFN duty applies; the EU-India FTA concluded on 27 Jan 2026 is not yet in force.
Gulf (GCC)
Saudi Arabia: regulated products need a SASO Product Certificate of Conformity plus a per-shipment Shipment Certificate issued through SABER; goods without the SCoC are refused. Electrical pumps and motors may also need SASO energy-efficiency compliance.
Southeast Asia
Agricultural and domestic pump demand in Indonesia, Vietnam and the Philippines; national safety marks may apply.
Africa
Large irrigation and borewell market; Kenya: most regulated goods need a PVoC Certificate of Conformity from a KEBS-appointed inspection agency before shipment. Nigeria: regulated goods need a SONCAP Product Certificate and per-shipment SONCAP Certificate (needed to process Form M).
General guidance, not legal advice. Confirm current requirements with your customs broker or the regulator.
Quality control
- • Performance test certificates (head, flow, efficiency) per ISO 9906
- • Electrical safety tests
- • Pre-shipment inspection on request
Certifications available
- • ISO 9001
- • CE marking
- • UL listing
- • BIS certification
- • SASO / SABER conformity
Held by the producing supplier for the specific lot; copies shared with the quote.
Shipping documents
- • Commercial invoice
- • Packing list
- • Bill of lading / airway bill
- • Certificate of origin (preferential where an FTA applies)
- • Pump test certificate
- • CE Declaration of Conformity
- • SABER / PVoC / SONCAP certificates as applicable
- • ISPM-15 certificate
Export markets
- Centrifugal & Submersible Pumps exporter to South Africa
- Centrifugal & Submersible Pumps exporter to Tanzania
- Centrifugal & Submersible Pumps exporter to Nigeria
- Centrifugal & Submersible Pumps exporter to United Arab Emirates
- Centrifugal & Submersible Pumps exporter to Oman
- Centrifugal & Submersible Pumps exporter to France
Frequently asked questions
Which pump suits a borewell?
A borewell submersible sized to the bore diameter (3-8 inch), depth (total head) and required flow.
Do you supply 60 Hz versions?
Yes. Many makers offer 60 Hz and 110/220 V variants for the Americas and parts of the Middle East.
Are pumps tested before dispatch?
Yes. Each pump or a sample per lot is tested for head, flow and power, with test certificates.
Can you supply solar pumping systems?
Yes, DC/AC solar pumps with controllers, sized to the site.
Can pumps carry our brand?
Yes, as OEM/private label with your nameplates and packaging.
Request a quote for Centrifugal & Submersible Pumps
Tell us grade, quantity and destination. We reply with options, packaging and pricing on your Incoterm.
